GOT2000 HMI GT2505-VTBD 5.7 Inch TFT Panel

Product Introduction

GT2505 – VTBD is a human-machine interface touch screen of the GOT2000 series. It is equipped with a 5.7-inch TFT color LCD screen with a resolution of 640×480, which can present 65536 colors, and the display is clear and delicate. It adopts an analog resistive touch screen, single-touch design, with a touch life of more than 1 million times. It has built-in 32MB storage ROM and 80MB running RAM, and also has SD The memory card slot is used to expand storage; it uses 24V DC power supply, the body protection level reaches IP67, and has rich interface configurations, including 1 RJ45 Ethernet port (supports 10BASE-T/100BASE-TX, and supports AUTO MDI/MDI-X), 1 RS-232 interface, 1 RS-422/485 interface, and is equipped with 2 USB The interface can be adapted to various mainstream industrial protocols such as Modbus and CC-Link. It can seamlessly connect with Mitsubishi PLC, servo drives and other equipment, and can also communicate with other brands of industrial control equipment.

FAQ:

1.If the touch panel of GT2505-VTBD is partially inoperable, can the panel be replaced directly or does it need to be repaired together with the motherboard?

When GT2505-VTBD encounters partial touch failure, priority should be given to checking whether the fault is related to the touch panel. Most likely, the touch panel component can be directly replaced. There is no need to repair the motherboard together. Only in rare special cases, motherboard maintenance is required.

1. Prioritize the fault on the touch panel side and replace the corresponding components separately: the touch function is independently performed by the touch panel (including touch film, sensing layer, etc.) and the connecting cable. Local touch failure is mostly caused by problems with these components. On the one hand, frequent operations and slight bumps in industrial scenarios can easily cause damage to the local sensing layer of the touch panel, or damage to the surface protective film, affecting touch signal transmission; on the other hand, the cable connecting the touch panel and the motherboard may become loose and oxidized due to vibration, causing local signal transmission interruption. Moreover, touch panel components corresponding to GT2505-VTBD can be purchased separately on the market, such as special touch films, front cover touch modules and other repair accessories. Replacing such components can solve the problem of local touch inefficiency.
2. Motherboard related repairs are only for special circumstances: only after troubleshooting the touch panel and cables, and there is still a local touch failure problem, motherboard related repairs need to be considered. For example, the touch IC chip on the motherboard that is responsible for processing touch signals is damaged, the chip solder joints are weakly soldered, or there is a component failure in the circuit branch of the motherboard that corresponds to the touch signal. However, this type of failure rarely leads to simple local touch failure, and is usually accompanied by other problems such as display abnormalities and communication interruptions. In this case, there is no need to directly replace the motherboard. Priority is given to professional maintenance personnel to check the circuit voltage with a multimeter, repair the soldered joints with a hot air gun, or replace the faulty touch chip. Only when the motherboard is seriously damaged and cannot be repaired, the motherboard needs to be replaced.

2.When configuring GT2505-VTBD using GT Works3 software, will there be compatibility issues if the software version is higher than 1.180N?

When configuring GT2505-VTBD with GT Works3 software, there will usually be no compatibility issues with versions higher than 1.180N, but they can better adapt to the device functions:

1. Features of software version upward compatibility: The core of GT Works3 software version iteration is to adapt to more new functions, optimize stability, and maintain good backward compatibility with older models of devices of the same series. GT2505 – VTBD belongs to the GT25 model of the GOT2000 series, which is the key support object of GT Works3. Previous information showed that this model is compatible with GT Works3 Version 1.108N and later versions, and the widescreen GT25 series only requires version 1.175H or above. 1.180N has far exceeded the basic adaptation threshold, and higher versions will naturally not have reverse compatibility issues.
2. Adaptation advantages of higher versions of software: GT Works3 versions higher than 1.180N will most likely fix small-probability BUGs that may exist in lower versions, such as occasional data packet loss during configuration transmission and lags when editing specific function modules. At the same time, if you need to use advanced functions such as GT2505-VTBD’s GOT Mobile remote monitoring and drive recorder, higher versions of the software may optimize the configuration process of these functions, reduce the operational difficulty during configuration, and improve debugging efficiency.
3. Special details to note: Although there is no compatibility risk, it is recommended to avoid using preview software that is in the testing phase, and give priority to the official version released by Mitsubishi’s official website; if you have previously created a configuration project with the 1.180N version, and open it for editing with a higher version software, the file may automatically upgrade the format. If you need to roll back to the 1.180N version after the upgrade, you may need to export a compatible format, otherwise it will not open normally.