Product Introduce
22B-D6P0N104 is a compact AC inverter of the PowerFlex 40 series. It supports three-phase 480V AC input, is suitable for motor power up to 2.2kW (3 horsepower), has an output rated current of 6.0A, has a built-in braking insulated gate bipolar transistor (IGBT), supports voltage-frequency ratio (V/HZ) and sensorless vector control methods, has a built-in RS-485 communication interface, and is equipped with an integrated LED. The display screen and digital buttons facilitate on-site operators to directly debug parameters and monitor the operating status of the equipment without the need for additional external operation modules.
FAQ:
1.What is the specific meaning of parameter P110 of 22B-D6P0N104?
Parameter P110 of 22B-D6P0N104 means control mode selection, which is used to switch the core control mode of the frequency converter.
2.When 22B-D6P0N104 is networked with PLC, which communication protocol needs to be matched to achieve seamless data interaction?
- Default adaptation protocol: The inverter integrates an RS485 interface and supports the Modbus RTU protocol as standard. This is a common protocol in the industrial field and is compatible with most brands of PLCs (such as Siemens S7-200/300, Mitsubishi FX series, etc.). There is no need to install additional modules. You only need to simply configure parameters such as baud rate and slave address to realize basic data interaction such as parameter reading and speed control of the inverter by PLC. The configuration cost is low and the operation is simple.
- Protocol for additional module expansion: If the PLC in the project needs to rely on a specific industrial bus or Ethernet network, it can be matched with the corresponding 22COMM series communication module expansion protocol:
| Communication Module | Compatible Protocol | Application Scenario |
| 22COMMD | DeviceNet | Suitable for SLC, ControlLogix series PLCs; ideal for multi-point communication of field-level devices, enabling fast command delivery from PLC to inverter |
| 22COMME | EtherNet/IP | Compatible with ControlLogix and other Ethernet-enabled PLCs; meets high-speed, large-data-volume communication requirements, and supports advanced functions such as network routing and automatic inverter parameter replacement |
| 22COMMP | PROFIBUS DP | Adapted for mainstream PLCs like Siemens S7-300/400; suitable for bus networking in large and medium-sized industrial sites, reducing network data volume and ensuring communication stability |
| 22COMMC | ControlNet | Matches industrial control networks composed of PLCs; supports network-configured inverters and data transmission triggered by status changes, applicable to complex scenarios with multi-device collaboration |
3.What is the input voltage range and adaptable motor power range supported by 22B-D6P0N104?
- Input voltage range: It is suitable for three-phase alternating current. The standard input voltage is 380 – 480V. The voltage fluctuation adaptation range can reach 342 – 528V. It is suitable for power supply frequency of 48 – 63Hz and can cope with small fluctuations in the power grid.
- Adaptable motor power: Its own rated adaptable motor power is 2.2kW (3.0 horsepower); however, from the scope of adaptation, it is compatible with motors from 0.4 to 11kW, with a rated output current of 6A during operation. It also supports an overload current of 9A for 60 seconds, which can meet the short-term overload operation requirements of motors of different powers.
Reviews
There are no reviews yet.