22B-D017N104 requires additional configuration modules or protocol gateways to communicate with ControlLogix PLC. The core does not match the native protocols of the two (the inverter supports Profibus DP, and the PLC natively supports EtherNet/IP, etc.).
There are two adaptation solutions:

1. Install Profibus DP special modules (such as SST-PB3-CLX, MVI56-PDPMV1) in the PLC rack;

2. Use Profibus DP and EtherNet/IP protocol gateway for protocol conversion. When wiring, an external Profibus DP terminal resistor is required to ensure stability.

The allowed three-phase input voltage fluctuation range of 22B-D017N104 is 342 – 528V AC, and its rated input voltage range is 380 – 480V AC.
In addition, the inverter has clear overvoltage and undervoltage protection triggering thresholds: when the DC bus voltage reaches 810V (corresponding to the input line voltage of about 575V AC), it will trigger an overvoltage trip; when the DC bus voltage is as low as 390V (corresponding to the input line voltage of about 275V AC), it will trigger an undervoltage trip, which further defines its protection boundaries under extreme voltage conditions.

3.Can the overvoltage protection function of 22B-D017N104 be turned off manually??

The overvoltage protection function of the PowerFlex 40 series inverter that 22B-D017N104 belongs to cannot be turned off manually. This function is a basic built-in protection mechanism to ensure the safety of the core components of the inverter. It only supports the adjustment of relevant parameters rather than the shutdown operation.

Contact US to get a good prices now !