Overview
The Allen‑Bradley VPL-B1002M-PJ14AA Low-inertia AC synchronous servo motor, multi-turn absolute encoder, integrated DIN connector, double magnetic steel stack length, flat key output shaft, threaded holes at the shaft end, three-phase AC high-voltage level IEC metric FF type freely installable hole, 100mm bolt round installation flange, approximately 5.44kg
Specification
| Item | Specification |
|---|---|
| Series | Kinetix VPL Low Inertia AC Servo Motor |
| Voltage Class | 400/480V AC High Voltage Winding |
| Frame Size | 100mm IEC Flange |
| Stack Length | 2 Stack Laminations |
| Winding Code | M (High Speed Winding) |
| Rated Speed | 6000 rpm |
| Max Speed | 6500 rpm |
| Continuous Stall Torque | 3.39 N·m |
| Peak Stall Torque | 7.82 N·m |
| Encoder Type | Hiperface DSL Absolute Encoder, 18-bit Single-turn + 12-bit Multi-turn, SIL2 compliant |
| Shaft Style | Keyed Output Shaft |
| Connector Type | Integrated Single SpeedTec DIN Connector (Power + Feedback + Brake) |
| Brake | Built-in 24V DC Holding Brake |
| Protection Class | IP50 standard; IP66 with original shaft seal & matched cables |
| Approximate Weight | 5.44 kg |
| Rotor Feature | Low inertia rare earth permanent magnet rotor |
| Operating Ambient Temp | 0℃ ~ 40℃ (continuous rated output) |
| Compatible Drives | Kinetix 5500, Kinetix 5700, ArmorKinetix DSD |
| Matching Cable Series | 2090‑CSxM1xx SpeedTec Single Cable |
| Certifications | UL, CSA, CE, UKCA |
| Application Feature | High dynamic response, no homing required after power on, suitable for vertical axes |
FAQ
1.What are the specifications of the motor flange for VPL-B1002M-PJ14AA?
The 100mm IEC standard flange, bolt circular diameter 100mm
2.What are the rated speed and the maximum speed of the VPL-B1002M-PJ14AA?
Supported. The Rated rotational speed: 6000 rpm, Maximum rotational speed: 6500 rpm.
3.What is the voltage level of power supply that the VPL-B1002M-PJ14AA servo motor is compatible with?
The Compatible with 400/480V three-phase AC high-voltage power supply levels.
4.Which lines are integrated by the SpeedTec connector used in the VPL-B1002M-PJ14AA motor?
The
- Three-phase power supply line for the motor
- Feedback signal line for the Hiperface DSL encoder
- 24V brake control power supply line
Looking for Original New VPL-B1002M-PJ14AA Three Phase AC high Voltage level Servo Motor
We supply this VPL-B1002M-PJ14AA mainly to system integrators and maintenance teams for replacement and retrofit projects.
Contact US to get a good prices now !
Reviews
There are no reviews yet.