VPL‑A0752E‑CJ12AA Kinetix VP Low Inertia Servo Motor 3500 RPM

Overview

The AB Kinetix VP Low Inertia Servo Motor, 240V AC, 2 sets of magnetic steel laminations, IEC metric flange installation, does not support DIN rails, Hiperface‑DSL 18-bit single-turn absolute encoder, SpeedTec DIN connector, output shaft with flat key slot, winding F-class insulation, cast aluminum housing, motor body IP50.

Specification

Item	VPL‑A0752E‑CJ12AA Kinetix VP Servo Motor
Series	VPL Low‑Inertia Kinetix VP
Rated Voltage	240V AC
Rated Power	2.34 kW
Rated Speed	3500 RPM
Max Speed	4200 RPM
Rated Torque	6.38 N·m
Stall Torque	6.74 N·m
Rotor Inertia	0.522e‑3 kg·m²
Encoder	Hiperface‑DSL,18‑bit single‑turn, no multi‑turn, no safety channel
Shaft	Keyed shaft with keyway, Φ19 mm
Brake	No built‑in holding brake
Connector	Single SpeedTec DIN connector, ±325° rotatable
Frame size	75 mm bolt circle IEC flange
Weight	4.8 kg
Ingress Protection	IP50 (IP66 with sealed cable)
Insulation Class	Class F

FAQ 

1.What are the rated power, rated speed and maximum speed of the VPL-B0632T-WK14AA motor?

The

• Rated power: 2.34 kW
• Rated speed: 3500 RPM
• Maximum speed: 4200 RPM

2.What are the overall dimensions and net weight of the VPL-A0752E-CJ12AA machine, and what is the material of the casing?

Supported. The

• Overall length of the entire machine body (excluding the extension of the SpeedTec connector): 178.3 mm; Maximum outer diameter of the flange: 98 mm
• Net weight of the entire machine: 4.8 kg (without brake version)
• Shell material: Cast aluminum shell

3.What protocol does the VPL-A0752E-CJ12AA encoder use? What are the single-circle and multi-circle resolutions? Does it have a SIL safety channel?

The 

• Encoder protocol: Hiperface-DSL (Single-cable Absolute Value Feedback)
• Single-loop resolution: 18 bits
• No multi-loop counting, only single-loop absolute value
• Does not have SIL2/PLd safety channel

4.What are the rated torque and no-load torque parameters for VPL-A0752E-CJ12AA? What is the value of the rotor inertia?

The

• Rated torque: 6.38 N·m
  Stall torque (continuous stall torque): 6.74 N·m
  Rotor inertia: 0.522 × 10⁻³ kg·m²

Looking for Original  New VPL‑A0752E‑CJ12AA Kinetix VP Low Inertia Servo Motor 3500 RPM