VFD1100CP43A-00 Delta CP2000 Series AC Drive 110kW 220A 125HP

Overview

The Delta CP2000 Series AC Drive, 460V, E1 frame, 6-pulse rectification, DC reactor, LD light-load 220A, ND heavy-load 180A, built-in PLC, hardware RTC (chronometer) with a 10-year lifespan, 8 pumps linked together, PCB circuit board fully covered with three-layer protection coating, IP00 open bare machine, wall-mounted screw installation, forced air cooling.

Specification

Item	Specification
Model	VFD1100CP43A‑00
Series	CP2000 Fan‑Pump Drive
Rated motor power	110kW(150HP),3‑phase 380‑480V
Frame size	E1
Output current ND/LD	180A / 220A
Rectifier	6‑pulse
Built‑in DC reactor	Yes
Built‑in EMC filter	No
Built‑in braking chopper	No
Built‑in PLC steps	10000 steps(RTC real‑time clock)
Max pump quantity	8 pumps
Dimension(W×H×D)	370 mm × 733 mm × 282 mm
Weight	64.7 kg
Cooling	Forced air cooling, replaceable fan
Enclosure rating	IP00
Keypad	KPCC‑01, remote extension supported
PCB Conformal coating	Class3C2
Operation temp	0‑50℃ full rating

FAQ 

1.VFD1100CP43A-00 – Overall width, height and depth dimensions of the machine, net weight of the machine, frame model?

The

• Frame model: E frame (E1)
• Net weight of the entire machine: 63.6 kg
• Overall dimensions of the machine (width 370 mm × height 733 mm × depth 282 mm)

2.The reserved ventilation spacing between the upper and lower, as well as the left and right air ducts of VFD1100CP43A-00. What are the possible fault consequences caused by the blockage of the air ducts?

Supported. The

• Ventilation spacing reserved for ducts:
• Up and down direction: ≥ 150 mm
• Left and right direction: ≥ 50 mm
• Consequences of duct blockage failure: Trigger overheating pre-warning; Execute power reduction output; Report OH overheating fault; Variable frequency drive stops and trips protection;

3.How many total steps does the PLC program inside VFD1100CP43A-00 have?

The

• Built-in PLC program total steps: 10,000 steps (10K steps).
• Integrated hardware RTC perpetual calendar real-time clock, supporting sequential logic, timing start/stop, pump group timed rotation, etc. for automated control.

4.Does the VFD900CP43A-21 cooling fan support disassembly and replacement independently?

The At an altitude of 2500 meters, full power output is not possible. This altitude exceeds the maximum 2000 meters allowed by the standard for the grounding system specified in the manual. Both the insulation gap and heat dissipation are limited, so it cannot be directly used on the machine. An assessment and confirmation must be obtained before it can be implemented in the project.

Looking for Original  New VFD1100CP43A-00 Delta CP2000 Series AC Drive 110kW 220A 125HP