Product Introduce
6ES7151-1AB05-0AB0 is a SIMATIC ET200S series PROFIBUS DP standard interface module. It can establish high-speed data interaction with PLC master stations such as S7-300/400. It supports the DP V0/V1 protocol and can mount up to 64 ET200S series digital, analog, and functional modules (such as counting and positioning modules). It supports I/O Modules are hot-swappable and faulty modules can be replaced without shutting down.
Parameter
| Parameter | Value |
|---|---|
| Product Series | SIMATIC ET200S |
| Communication Protocol | PROFIBUS DP |
| Max Baud Rate | 12 Mbps |
| Max I/O Modules | 64 ET200S modules |
| Power Supply | 24 V DC |
| Diagnostic Function | Module status, communication fault diagnosis |
| Hot Swap | Supported (for I/O modules) |
| Operating Temperature | -20～60°C |
| Mounting | DIN rail mounting (35 mm) |
FAQ:
1.What is the PROFIBUS DP communication rate range supported by 6ES7151-1AB05-0AB0, and what is the maximum communication distance at 12 Mbps rate?
| Item | Specification |
|---|---|
| PROFIBUS DP Baud Rate Range | 9.6 kbps – 12 Mbps |
| Max Distance @ 12 Mbps | 100 m |
2.6ES7151-1AB05-0AB0 can mount up to 64 ET200S I/O modules. Is the actual configuration limited by the I/O address range of the master PLC?
It will be limited by the I/O address range of the master station PLC. The nominal 64 ET200S I/O modules are the maximum expansion capability of the hardware, not the actual upper limit available.
3.What is the firmware compatibility between 6ES7151-1AB05-0AB0 and the old model 6ES7151-1AB02-0AB0 of the same series? Can it be directly replaced without modifying the hardware configuration?
It can be directly replaced without modifying the hardware configuration. The firmware of the two is fully compatible and is an iterative model of the ET200S PROFIBUS DP interface module of the same generation.
Looking for Original New SIMATIC DP ET200S 6ES7151-1AB05-0AB0 Interface PLC Module?
Contact US to get a good prices now !
Reviews
There are no reviews yet.