Overview
25B-D2P3N114 is an AC drive in the PowerFlex 525 series with a rated power of 0.75 kW (1 HP). It is suitable for three-phase 480 V AC power supply and supports frequency standards of 50 – 60 Hz. It is equipped with an integrated keypad with potentiometer and LED display, a built-in Ethernet/IP communication interface, and a protection level of NEMA IP20. It is an open housing design.
FAQ:
1.The rated power of 25B-D2P3N114 is only 0.75kW. Which specific types of small industrial motors can it be adapted to? Does it support switching operation between variable frequency motors and ordinary asynchronous motors?
25B-D2P3N114 is suitable for small three-phase asynchronous motors of 0.75kW and below, permanent magnet synchronous motors, micro special asynchronous motors, and can be used for conveyor belts, small fans, micro compressors and other equipment.
25B-D2P3N114 supports switching operation between variable frequency motors and ordinary asynchronous motors, which can be achieved by adjusting control parameters: ordinary asynchronous motors are controlled by V/f, and parameters such as rated voltage and frequency are set; speed sensorless vector control is optional for variable frequency motors, and parameters such as carrier frequency and upper speed limit are fine-tuned without modifying the hardware.
2.The integrated keyboard of 25B-D2P3N114 only supports basic parameter settings. If complex PID adjustment or multi-speed control is required, is it necessary to connect an external operation panel or configure it through software?
25B-D2P3N114 does not require an external operation panel, and can complete complex PID adjustment and multi-speed control through the supporting software:
- PID adjustment: The integrated keyboard can only handle basic parameters, and complex PID adjustment can be achieved with the help of Connected Components Workbench (CCW) or Studio 5000 software. Through the software, you can finely set core parameters such as proportional gain, integral time, and differential time. It can also complete automatic tuning and trend recording of parameters, adapting to scenarios such as fans and pumps that require precise pressure and flow control.
- Multi-stage speed control: There is also no need for an external panel. Through the above two software, you can preset multi-stage operating frequency, switching logic and other parameters. At the same time, it comes standard with an embedded EtherNet/IP interface, which can be connected to the Rockwell Logix control ecosystem. If connected to a controller such as a PLC, it can also achieve multi-speed programmed control through software linkage controllers to meet the speed switching needs of different processes in the production line.
3.What safety protection functions does 25B-D2P3N114 have? What kind of protection mechanism will the device trigger when the motor is overloaded, short-circuited or the grid voltage fluctuates?
25B-D2P3N114 has built-in STO, overcurrent, overheating, ground fault and other protection functions:
- Motor overload: Inverse time overload protection is triggered. The more severe the overload, the faster the action, cutting off the output and giving an alarm.
- Short circuit: Instantly detect short-circuit current and immediately cut off the power loop to prevent the device from burning.
- Voltage fluctuation: suppress spikes or cut off output when overvoltage occurs; stop operation when undervoltage to avoid losses in the motor and inverter.
Looking for Original New PowerFlex 525 AC Drive 25B-D2P3N114 0.75KW 1HP ?
Contact US to get a good prices now !
Reviews
There are no reviews yet.