Overview
The AB ControlLogix series 36-pin cage-type screw removable terminal block RTB single-line 0.33 to 2.1mm² (22 to 14AWG), double-line 0.33 to 1.3mm² (22 to 16AWG), each terminal can connect up to 2 conductors. Standard low-profile deep housing.
Specificatio
| Item | Specification |
|---|---|
| Part Number | 1756-TBCH |
| Series | ControlLogix |
| Product Type | Removable Terminal Block RTB |
| Pin Count | 36 pin |
| Clamping Method | Screw cage clamp |
| Recommended Torque | 0.5 N·m |
| Wire Gauge Single | 22~14 AWG (0.33~2.1 mm²) |
| Wire Gauge Two Conductors | 22~16 AWG (0.33~1.3 mm²) |
| Housing Type | Standard depth housing |
| Compatible RTB Alternative | 1756-TBS6H spring type |
| Certification | UL Listed, FM Approved |
| Origin | Mexico |
| Warranty | 1 year standard factory warranty |
FAQ
1.1756-TBCH is a spring terminal or a screw terminal?
The It is a screw cage-type clamping terminal, not a spring terminal.
2.1756-TBCH How many wires can one terminal accommodate?
Supported. The
- A single terminal is allowed to connect up to 2 conductors.
- The single wire specification ranges from 0.33 to 2.1 square millimeters. When two wires are connected simultaneously, the diameter of a single wire is limited to 0.33 to 1.3 square millimeters. More than two wires are not permitted.
3.Should the 1756-TBCH module be purchased as part of the package or purchased separately?
The It needs to be purchased separately. The I/O module itself does not come with this terminal block when it is manufactured.
4.Does 1756-TBCH support the insertion and removal of modules after pre-wiring?
The
- Support pre-wiring. After connecting the on-site cables on the terminal, the terminal body and the I/O module can be separated directly. When replacing the module, there is no need to remove the on-site lines.
- Notes: The backplane supports hot plugging of modules. However, if the power supply of the on-site transmitter is not disconnected, plugging or unplugging the RTB terminal may cause an arc, which poses a risk. In explosion-proof areas, the power supply on the on-site side must be disconnected before operating.
Looking for Original New PLC 36 Pin Screw Terminal Block 1756-TBCH
We supply this 1756-TBCH mainly to system integrators and maintenance teams for replacement and retrofit projects.
Contact US to get a good prices now


Reviews
There are no reviews yet.