PanelView Plus Terminal 2711P-T7C4D8

Product Introduce:

2711P-T7C4D8 is a PanelView Plus 6 700 Series touchscreen with a 6.5-inch color active-matrix TFT display with a display area size of 132×99mm and a resolution of 640×480, supporting 18-bit color image display, equipped with an 8-wire analog resistive touchscreen, operating pressure range of 10 – 110g, withstands 100 Tens of thousands of press operations, built-in Ethernet interface, RS-232 interface and two USB host interfaces. The Ethernet interface is equipped with an RJ45 connector, supports 10/100Base-T network, and can be connected to the EtherNet/IP network to communicate with the controller; the USB interface supports connecting U disks, printers, mice, etc.

FAQ:

1.What is the highest version of FactoryTalk View Machine Edition supported by 2711P-T7C4D8? What compatibility issues should be paid attention to when upgrading the version?

2711P-T7C4D8 is stably compatible with FactoryTalk View ME. The highest version is V11, and higher versions are not compatible due to hardware limitations (Windows CE 6.0 system, 512MB RAM/flash memory).

1. Update the device firmware to the appropriate version first to avoid software-firmware mismatch causing program loading failure.
2. Higher versions of software occupy more resources, so you need to test and turn off non-essential functions to prevent crashes caused by insufficient memory.
3. Third-party ActiveX controls may not be loaded due to interface changes and need to be replaced with official adapted versions.
4. Communication parameters (IP, protocol stack, etc.) may change, and the communication configuration with the PLC needs to be rechecked.
5. Back up old project files and use the new version to detect and repair invalid scripts/function modules to avoid backward compatibility issues.

2.Can the two USB host interfaces of 2711P-T7C4D8 be connected to a USB flash drive and a printer at the same time? Are there any driver compatibility restrictions?

The two USB host interfaces of 2711P-T7C4D8 can connect U disks and printers at the same time. There are driver compatibility restrictions:

1. The printer must support PCL3 language. HP, Canon, and Epson models officially tested by Rockwell are preferred. Non-PCL3 or non-mainstream brands may not be recognized.
2. The U disk must be in FAT32 format, and industrial-grade products are recommended; large-capacity U disks in NTFS format may fail to be recognized.
3. Niche peripherals require manual driver configuration or shared printers over the network to avoid compatibility issues.