MPL‑B420P‑MJ74AA MP Series MPL AC Rotary Servo Motor 5000 RPM

Overview

The AB MP series MPL AC rotary servo motor has a rated voltage of 460 V AC, a frame size of Frame 4, is equipped with a Hiperface multi-turn absolute value encoder, the output shaft is equipped with a standard flat key, uses a SpeedTec right-angle DIN connector, and has a built-in 24 V DC power failure braking electromagnetic brake (normally closed type). The flange installation form complies with the IEC 60034-7 metric FF standard. The enclosure is made of cast aluminum alloy, and the net weight is 6.20 kg.

Specification

Item	MPL‑B420P‑MJ74AA MP Series Servo Motor
Series	MPL Low‑Inertia MP‑Series
Rated Voltage	460V AC
Rated Power	2.44 kW
Rated Speed	5000 RPM
Max Speed	6000 RPM
Rated Torque	4.65 N·m
Peak Torque	12.4 N·m
Rotor Inertia	0.273e‑3 kg·m²
Encoder	Hiperface multi‑turn absolute,1024 sin/cos cycles per rev,without SIL safety channel
Shaft	Keyed shaft, Φ24 mm
Brake	Built‑in 24V DC holding brake
Connector	SpeedTec DIN right‑angle connector,180° rotatable
Frame size	115 mm bolt circle IEC FF flange
Weight	6.20 kg
Ingress Protection	IP50 (no factory fitted shaft seal)
Insulation Class	Class F

FAQ 

1.What are the rated power, rated speed and maximum speed of the MPL-B420P-MJ74AA motor?

The

• Rated power: 2.44 kW
• Rated speed: 5000 RPM
• Maximum speed: 6000 RPM

2.What are the overall dimensions and net weight of the MPL-B420P-MJ74AA machine? What is the material of the casing?

Supported. The

• Overall length of the entire machine body (including brake, excluding the extension of SpeedTec connector): 212.6 mm
• Maximum outer diameter of the flange: 145 mm
• Net weight of the entire machine: 6.20 kg (with brake, without shaft sealing kit version)
• Shell material: Cast aluminum alloy

3.Can the MPL-B420P-MJ74AA motor be installed using DIN rails? What installation methods are supported?

The

• The motor cannot be installed using DIN rails.
• It only supports flange end face installation.
• An IEC FF flange is adopted, and the flange surface is fixed by 4 M10 screws. The motor body does not have a rail clamping structure and rail mounting is not allowed.

4.What is the diameter of the output shaft of the MPL-B420P-MJ74AA, and does it have a flat key slot? Are there any threaded holes at the shaft end?

The

• Output shaft diameter: Φ24 mm
• Flat key slot: Present (J represents a flat key output shaft)
• Shaft end: Equipped with a central internal thread hole for axial locking and fixation of the coupling

Looking for Original  New MPL‑B420P‑MJ74AA MP Series MPL AC Rotary Servo Motor 5000 RPM