LOGO 230RCE Logic Module 6ED1052-1FB08-0BA2 PLC

OverView

6ED1052-1FB08-0BA2 is a LOGO! series DI 8 digital input expansion module. It is specially designed for the LOGO! 7 series main module. The core is used to expand the digital signal acquisition channel and is suitable for switch and sensor signal input in small industrial automation scenarios. It is only compatible with the LOGO! 7 series main module and is not compatible with the LOGO! 8 and above series. It needs to be programmed with LOGO! Soft Comfort V6.1 and above.

FAQ:

1.Is 6ED1052-1FB08-0BA2 compatible with source type (PNP) sensors?

Compatible with PNP sensors, the module input characteristics are adapted, no additional adapters/jumpers are needed, just follow the standard wiring, and no special software configuration is required.
When wiring, you only need to connect the signal output terminal of the PNP sensor to the corresponding digital input terminal of the module. The sensor power supply terminal matches the standard power supply. The module will automatically recognize the valid input signal. There is no need to adjust jumpers or configuration parameters like some special modules. The adaptation process is simple and direct.

2.6ED1052-1FB08-0BA2 How to set the input signal filtering parameters?

6ED1052-1FB08-0BA2 needs to set the input signal filtering parameters through the LOGO! Soft Comfort programming software to filter out signal interference and jitter:

1. Open the project with LOGO! Soft Comfort software, select the module or input point to enter the configuration;
2. Set the input filter time (10-100ms, mechanical signal 10-30ms);
3. Save and download the configuration to the module;
4. In strong interference scenarios, an RC filter or shielded wire can be used.

3.6ED1052-1FB08-0BA2 module indicator light turns red. What are the common reasons (power supply, communication, overload)?

1. Abnormal power supply: the voltage exceeds the 20.4-28.8VDC range, the wiring is loose/the polarity is reversed;
2. Communication failure: loose connection with LOGO! 7 main module, electromagnetic interference, configuration mismatch;
3. Overload/channel failure: Single channel input current exceeds the standard, channel short circuit, sensor failure causes signal abnormality;
4. Problems with the module itself: internal circuit damage, abnormal firmware.

6ED1052 Logo Similar Products:

6ED1052-1CC08-0BA2 LOGO! 24CE, 8DI(4AI)/4DO, 400 Blocks
6ED1052-1FB08-0BA2 LOGO!230RCE, 8DI/4DO, 400 Blocks
6ED1052-1HB08-0BA2 LOGO! 24RCE, 8DI/4DO, 400 Blocks
6ED1052-1MD08-0BA2 LOGO!12/24RCE, 8DI(4AI)/4DO, 400 Blocks
6ED1052-2CC08-0BA2 LOGO! 24CEo, 8DI(4AI)/4DO, 400 Blocks
6ED1052-2FB08-0BA2 LOGO!230RCEo, 8DI/4DO,400 Blocks
6ED1052-2HB08-0BA2 LOGO! 24RCEO, 8DI/4DO, 400 Blocks
6ED1052-2MD08-0BA2 LOGO!12/24RCEO, 8DI(4AI)/4DO,400 Blocks
6ED1055-1CB00-0BA2 LOGO! DM8 24 Exp. mod., 4DI/4DO
6ED1055-1CB10-0BA2 LOGO! DM16 24 Exp. mod., 4 MW, 8DI/8DO
6ED1055-1FB00-0BA2 LOGO! DM8 230R Exp. mod. 2 MW, 4DI/4DO
6ED1055-1FB10-0BA2 LOGO! DM16 230R Exp. mod. 4 MW, 8DI/8DO
6ED1055-1HB00-0BA2 LOGO! DM8 24R Exp. mod. 2 MW, 4DI/4DO
6ED1055-1MA00-0BA2 LOGO! AM2 Exp. mod., 12/24V, 2AI,
6ED1055-1MB00-0BA2 LOGO! DM8 12/24R Exp. mod. 2 MW, 4DI/DO
6ED1055-1MD00-0BA2 LOGO! AM2 RDT, 2AI, -50..+200DECR/C
6ED1055-1MM00-0BA2 LOGO! AM2 AQ, 2AQ, 0-10V, 0/4-20mA
6ED1055-1NB10-0BA2 LOGO! DM16 24R Exp. mod. 4 MW, 8DI/8DO
6ED1055-4MH08-0BA1 LOGO! TD Textdisplay, 6 Lines
6ED1058-0CA08-0YE1 LOGO! SOFT COMFORT V8 UPGRADE