Delta VFD022C43A-21 C2000 Series Drive 2.2kw 460VAC IP20

Overview

The Delta C2000 Deries VFD022C43A-21 Heavy-duty Model, 2.2kW (3HP) Three-phase, 380/460VAC 50/60Hz, IP20 enclosure, detachable forced air-cooling fan. The entire machine weighs 2.8kg. Dimensions: 130mm (width) × 250mm (height) × 170mm (depth). Built-in small PLC with RS485 communication PCB. Three-layer coating for protection against dust, moisture and corrosion.

Specification

Item	Specification
Series	C2000 Plus High Performance Vector VFD
Model	VFD022C43A-21
Rated Motor Power	2.2kW (3HP)
Input Power	3-phase 380/460VAC, 50/60Hz; Voltage range: 323~528V
Output Power	3-phase 0~460VAC
HD Rated Output Current	5.5A (150% overload 60s, 180% overload 3s)
SHD Rated Output Current	4.2A (150% overload 60s, 200% overload 3s)
Frame Size	A frame
Protection Class	IP20
Built-in Brake Unit	Yes, external brake resistor required
Built-in EMC Filter	No
Built-in DC Reactor	No
Cooling	Forced air cooling, detachable fan
Net Weight	2.8kg
Dimension(W×H×D)	130mm × 250mm × 170mm
Control Mode	V/F, Sensorless Vector SVC, Closed-loop FOC (with PG card), PMSM dedicated control
Low-speed Torque	150% rated torque at 0.5Hz (SVC); 150% full torque at 0Hz (Closed-loop FOC)
Output Frequency Range	0~599Hz
Carrier Frequency	2~15kHz adjustable
Acc/Dec Time	0.01~6000s independent setting, S-curve support
Digital Input	6 DI (NPN/PNP switchable)
Digital Output	2 relay outputs, 1 pulse output
Analog Input	2 AI (0~10V / 4~20mA)
Analog Output	2 AO
Built-in PLC Capacity	10000 steps, programming via WPLSoft
Standard Communication	RS485, Modbus RTU
Built-in Functions	Multi-speed, simple positioning, wobble frequency, PID constant pressure/current control, component life monitoring, motor thermal protection
Optional Communication Cards	CANopen, Profibus-DP, DeviceNet, Modbus TCP, EtherNet/IP, EtherCAT
Optional Card	Incremental PG encoder card for closed-loop vector control
Protection Functions	Overcurrent, overvoltage, undervoltage, overload, overheat, output short circuit, ground fault, input phase loss, motor stall, IGBT protection, cooling fan fault detection
Operating Ambient Temp	-10℃ ~ 50℃ (derating above 40℃)
Storage Temperature	-20℃ ~ 70℃
PCB Coating	Three-proof coating for dust & moisture resistance
Certifications	CE, UL, cUL
Suffix -21 Feature	Revised C2000 Plus version, enhanced heat dissipation, extended capacitor service life, optimized PMSM control algorithm
Typical Application	Machine tools, conveyors, small cranes, packaging machinery, fans & pumps, woodworking equipment

FAQ 

1.What is the rated power of the motor that this VFD022C43A-21 is compatible with?

The

• The motor is designed to be compatible with a rated power of 2.2kW (3HP) for heavy-duty conditions.
• In normal light-load scenarios, it can be adapted to a 3.0kW (4HP) motor.

2.What is the total weight of the VFD022C43A-21 machine and its overall length, width and depth dimensions?

Supported. The

• Overall dimensions (width × height × depth) 130mm × 250mm × 170mm
• Standard net weight: 2.8 kilograms

3.How many steps of PLC program are built into VFD022C43A-21, and which software is used for programming?

The

• Built-in PLC program capacity: 10,000 steps (10k steps)
• Programming software: Mainly uses WPLSoft; the new version can also use ISPSoft software to write programs

4.Which motor control modes does VFD022C43A-21 support?

The

• V/F scalar control (IMVF)
• Sensorless vector SVC
• Closed-loop flux-oriented FOC vector (requires installation of PG encoder card)
• Special non-sensing control for permanent magnet synchronous motors

Looking for Original  New Delta VFD022C43A-21 C2000 Series Drive 2.2kw 460VAC IP20