Allen Bradley 2094-BM03-S Kinetix 6000 Axis Module

Overview

2094-BM03-S is a 400V AC multi-axis servo drive axis module of the Kinetix 6000 series. It has a rated output power of 13.5kW, a nominal input voltage of 650 VDC, and a three-phase AC input voltage adaption of 360 – 480 V. The continuous current is 21.2A, and the peak current reaches 53.0A. Its inverter standard peak overload can reach 150%, enhanced peak overload up to 255%, energy conversion efficiency up to 98%, short circuit current rating of 200,000A (rms) symmetrical.

FAQ:

1.What communication protocols does 2094-BM03-S support? Can it be seamlessly integrated into an EtherNet/IP industrial network?

2094-BM03-S supports a variety of communication protocols adapted to industrial scenarios, and can be seamlessly integrated into EtherNet/IP industrial networks:

2094-BM03-S supports EtherNet/IP, DeviceNet, and DH+ protocols, and can also support the motion control-specific CIP Motion protocol through EtherNet/IP.
It can seamlessly integrate EtherNet/IP industrial networks and has a built-in EtherNet/IP interface without the need for additional conversion modules. It can be directly connected and collaborated with ControlLogix PLC and other equipment to quickly complete configuration and debugging through Studio 5000 software.

2.If I need to drive a 15kW servo motor, is the 2094-BM03-S module suitable? What matching conditions should we pay attention to?

2094-BM03-S (rated 13.5kW) is not suitable for driving 15kW motors. It has insufficient power/current and is prone to overload damage.
Required matching conditions (not recommended): motor instantaneous current ≤53A peak, voltage adaptation 360-480V, encoder type compatible, equipped with independent heat dissipation and stable power supply, it is recommended to choose a higher rated power module.

3.What are the input voltage range, power rating and peak current of 2094-BM03-S?

1. Input voltage: three-phase AC 360-480V, its corresponding nominal DC input voltage is 650V, which belongs to the 400V level axis module.
2. Rated power: The rated continuous output power is 13.5kW, which can stably support the long-term operation of the servo motor within the corresponding power range.
3. Peak current: There are slight differences between different series. The peak current of A series is 31.8A; the peak current of B series and C series is higher, up to 53.0A, adapting to the instantaneous overload operation requirements in different scenarios.