2198‑S086‑ERS3 Kinetix 5700 Single Axis Inverter 43A 29.7 kW

Overview

The AB Kinetix 5700 Single-Axis Inverter has a DC bus architecture, Hiperface-DSL single-cable encoder, supports DLR ring network topology, CIP Motion motion control, no built-in braking resistor, dual-port EtherNet/IP, LCD display screen, parameter configuration relying on Studio5000, overall dimensions (width 85 mm × height 433 mm × depth 250 mm), DIN rail installation, and the net weight of the entire machine is 5.21 kg.

Specification

Item	Specification
Catalog No.	2198‑S086‑ERS3
Series	Kinetix 5700 Single‑Axis Inverter
DC Bus Input	458‑747V DC
Nom Continuous Power	29.7 kW
Continuous Output Current(rms)	43 A
Peak Output Current(rms)	86 A, max 1s duration
Internal Capacitance	560 µF
PWM Frequency	4 kHz fixed
Max Velocity Loop Bandwidth	400 Hz
Safety Function	Hard‑wired STO,SIL3/PL e;No CIP Safety
Communication	Dual‑port EtherNet/IP, DLR supported
Feedback	Hiperface‑DSL,EnDat,Incremental
Dimension(W×H×D)	85 mm × 433 mm × 250 mm
Weight	5.21 kg
Operating Temp	0~+50℃
Protection	IP20
Zero‑stacking installation	Supported

FAQ 

1.What are the overall width, height and depth dimensions of the 2198-S086-ERS3 machine, as well as its net weight?

The

• Overall dimensions of the machine (width 85 mm × height 433 mm × depth 250 mm)
• Net weight of the machine: 5.21 kg

2.2198-S086-ERS3: When multiple inverter modules are installed side by side, is it allowed to have zero stacking and close installation?

Supported. The

• Allow zero stacking and side-by-side installation
• Note: It is essential to strictly ensure that there is a ventilation reserve space of ≥40mm at the top and ≥100mm at the bottom; if the space between the top and bottom is insufficient, even with zero gap on the left and right, overheating reduction and overheating alarm will still occur.

3.Which types of encoder feedback are supported by the 2198-S086-ERS3 module?

The

• Hiperface‑DSL (Single Cable Servo Encoder)
• EnDat 2.2 (Digital Absolute Value, Single Loop / Multiple Loops)
• TTL Incremental Encoder (A/B/Z)
• Sine/Cosine Positive/Negative Incremental Encoder

4.2198-S086-ERS3, what is the communication interface? Does the dual network port support DLR device-level ring network?

The

• Communication interface: Dual-port EtherNet/IP (RJ45), 10/100M auto-sensing, supports CIP-Motion motion control and CIP energy diagnosis.
• DLR device-level ring network: Supports DLR device-level ring network function, capable of constructing linear and ring topologies, and achieving millisecond-level self-healing in the event of a single network point failure.

Looking for Original  New 2198‑S086‑ERS3 Kinetix 5700 Single Axis Inverter 43A 29.7 kW