2198‑CAPMOD‑2240 Kinetix 5700 Capacitor Energy Storage Module

Overview

The AB Kinetix 5700 Capacitor Energy Storage Module, 600 V DC, 2240 μF, external DC-BUS terminals, 85 mm width, fixed by either DIN rail / M5 screw panel or other methods, supports zero stacking and side-by-side installation with close spacing, without EtherNet/IP communication chip, IP20 protection, overall dimensions (85 mm wide × 345 mm high × 253 mm deep), Note: This module cannot work independently; it needs to be used in combination with other power supplies and inverter modules.

Specification

Item	Specification
Catalog No.	2198‑CAPMOD‑2240
Series	Kinetix 5700 Capacitor Module
Nominal DC‑Bus Voltage	600 V DC（458‑747V DC operating）
Internal Capacitance	2240 µF
Max External DC‑Bus Current	104 A
Control Power	24 VDC from backplane
Communication	None, only status LED
STO Safety	Not supported
Dimension(W×H×D)	85 mm × 345 mm × 253 mm
Weight	4.2 kg
Operating Temp	0~+50℃
Protection	IP20
Zero‑stacking installation	Supported

FAQ 

1.What are the rated voltage and the allowable operating voltage range for the 2198-CAPMOD-2240 DC bus?

The

• Rated voltage of the DC bus: 600 V DC
• Allowable operating voltage range: 458 V DC ～ 747 V DC

2.Where does the 24V control power supply of the 2198-CAPMOD-2240 module obtain its power from?

Supported. The Backplane bus acquisition of the Kinetix5700 system. It is not possible to directly connect a 24V control power supply to this module externally.

3.Which Kinetix5700 power supplies and inverter modules can the 2198-CAPMOD-2240 module be used in combination with?

The

• Hiperface‑DSL (Single Cable Servo Encoder)
• EnDat 2.2 (Digital Absolute Value, Single Loop / Multiple Loops)
• TTL Incremental Encoder (A/B/Z)
• Sine/Cosine Positive/Negative Incremental Encoder

4.When the 2198‑CAPMOD‑2240 module is used alone, what is the maximum allowable continuous current in amperes for the external DC bus? If the current exceeds this value, which module needs to be combined with it?

The

• When using the 2198-CAPMOD-2240 unit alone, the maximum allowable continuous current of the external DC bus: 104 A.
• If the external bus current exceeds 104A, up to 208A under the worst conditions, it needs to be used in parallel with the DC bus expansion module.

Looking for Original  New 2198‑CAPMOD‑2240 Kinetix 5700 Capacitor Energy Storage Module