20G21ND014JA0NNNNN PowerFlex 755TS AC Drive 7.5kW 14A

Overview

The AB PowerFlex 755TS AC Drive (20G2) TotalFORCE three-phase 480VAC, with DC bus terminal input, 6-pulse diode rectification, input pre-charging circuit, built-in braking IGBT, PCB anti-corrosion coating, digital DI: 1 channel, DeviceLogix embedded PLC, dual-port EtherNet/IP, DLR device-level ring network, Frame 3, vertical wall-mounted installation, forced air cooling, IP20 / NEMA-UL Open Type open type.

Specification

Item	20G21ND014JA0NNNNN PowerFlex755TS
Series	PowerFlex755TS 20G2 AC Drive
Rating	ND 7.5kW / HD 5.5kW 480V
Output Current ND/HD	14A / 12A
Overload	110%‑60s(ND);150%‑60s(HD)
Max Output Frequency	500 Hz
Frame size	Frame 3
Dimensions(W×H×D)	130×355×225 mm
Weight	8.2 kg
Dynamic Brake IGBT	Built‑in, external resistor required
Conformal Coating	Yes
DC‑Bus Terminals	Yes, DC terminals available
Enclosure rating	IP20 / NEMA‑UL Open Type
Cooling fan	Field‑replaceable，No hot‑swap

FAQ 

1.What is the model number of the 20G21ND014JA0NNNNN frame? What are the overall width, height and depth, as well as the net weight of the entire machine?

The

• Frame model: Frame 3
• Overall dimensions of the machine (width 130 mm × height 355 mm × depth 225 mm)
• Net weight of the machine: 8.2 kg

2.Does 20G21ND014JA0NNNNN have built-in braking IGBT?

Supported. The This machine is equipped with built-in braking chopper IGBT; the frequency converter itself does not have a braking resistor, and an external braking resistor must be connected externally.

3.Can the 20G21ND014JA0NNNNN cooling fan be disassembled independently? Is it allowed to perform maintenance by hot-plugging while the device is powered on?

The

• Cooling fan assembly: Can be disassembled and replaced separately. Comes with an original factory-fitted fan replacement kit.
• Hot-swappable with power on: Hot-swapping for maintenance is not allowed.

4.What installation methods does 20G21ND014JA0NNNNN support? Can it be installed using DIN rails?

The

• Installation method supported: Only vertical wall-mounted installation is allowed for the cabinet. Use M6 screws to fix the four corner installation holes of the main body.
• DIN rail: This machine does not support DIN rail installation. There is no DIN clip base, and the original factory also has no DIN rail adapter options. It is strictly prohibited to forcibly install it on the DIN rail for use.

Looking for Original  New 20G21ND014JA0NNNNN PowerFlex 755TS AC Drive 7.5kW 14A