20F11NC8P7JA0NNNNN PowerFlex 753 AC Drive 415V 4kW 8.7A

Overview

The AB PowerFlex 753 AC Drive 20F11NC8P7JA0NNNNN – Three-phase, 415V, ordinary load: 4kW, 8.7A; heavy load: 2.2kW, 5.0A. 6-pulse diode rectification, 24V DC digital IO + relay output. Embedded logic. Complete protection functions. Forced air cooling. Supports single unit disassembly and replacement. IP20/IP00 protection. NEMA UL Open type. Open cabinet body, only allowed to be installed inside a sealed control cabinet. Frame 2 rack. Must leave ventilation gaps on top and bottom. Overall size: width 222 mm × height 474 mm × depth 212 mm.

Specification

Item	Specification
Brand	AB
Series	PowerFlex 753 Mid Performance AC Drive
Catalog Number	20F11NC8P7JA0NNNNN
Frame Size	Frame 2
Input Supply	3‑Phase 340–415V AC ±10%, 50/60Hz, 6‑Pulse Rectifier with Pre‑charge Circuit, DC Bus Terminals Available
Continuous Normal Duty Output Current	8.7 A
ND 110% Overload (1 min)	9.57 A
Continuous Heavy Duty Output Current	5.0 A
HD 150% Overload (3 sec)	7.5 A
Normal Duty Motor Rating	4 kW
Heavy Duty Motor Rating	2.2 kW
Output Voltage	0 ~ 415 V 3‑Phase PWM
Output Frequency Range	0 ~ 500 Hz
Adjustable Carrier Frequency	2 kHz ~ 16 kHz
Control Modes	V/F Open Loop, Sensorless Vector SVC, Closed‑Loop Vector (encoder option card required)
Supported Motors	Induction Motor, Permanent Magnet Synchronous Motor
Encoder Port	No onboard port, optional encoder card
I/O Signal Voltage	24 V DC
STO Safety	Dual‑channel hardware STO, SIL3 safety level
EMC Filter	Built‑in EMC filter, common mode choke jumper installed
Dynamic Brake IGBT	Integrated, external brake resistor required
Internal Brake Resistor	Not equipped
HIM Panel	Blank cover, factory no keypad
PCB Conformal Coating	Standard model without coating
Cooling System	Replaceable independent fans, fan life predictive diagnostic
Enclosure Rating	IP20 / IP00, NEMA Open Type
Full Load Temp Range	0 ~ 50 ℃, derating above 50 ℃
Altitude Derating	No derating below 1000 m
Communication	Dual Gigabit EtherNet/IP via option card, DLR ring supported
Option Slots	3 slots for encoder, safety, extra I/O modules
Mounting Rule	Side-by-side zero gap allowed, vertical clearance required top & bottom
Overall Dimension (W×H×D)	222 mm × 474 mm × 212 mm
Net Weight	13.61 kg
Shipping Weight	Approx. 15.5 kg
Product Lifecycle	Active standard production model

FAQ 

1.When multiple cabinets are installed side by side, can they be stacked with zero gap both horizontally and vertically? 20F11NC8P7JA0NNNNN

The

• Support for multiple units to be placed side by side in a horizontal row with zero gap between each unit.
• It is strictly prohibited to stack vertically with zero gap. A ventilation gap must be reserved (mandatory regulation).

2.What are the overall dimensions and net weight of the complete machine for 20F11NC8P7JA0NNNNN?

Supported. The

• Overall dimensions (width × height × depth): 222 mm × 474 mm × 212 mm
• Overall weight: 13.61 kg

3.The rectification circuit of 20F11NC8P7JA0NNNNN adopts a multi-pulse structure. Is it integrated with pre-charging resistors and contactors?

The

• Use 6-pulse diode bridge rectification
• This machine is fully integrated with a pre-charging circuit, including a pre-charging resistor and a bypass contactor

4.What is the DC voltage for the input and output signals of the entire 20F11NC8P7JA0NNNNN machine?

The IO terminal standard power supply voltage: 24V DC

Looking for Original  New 20F11NC8P7JA0NNNNN PowerFlex 753 AC Drive 415V 4kW 8.7A