20F11NC3P5JA0NNNNN PowerFlex 753 AC Drive Three Phase 415V

Overview

The AB PowerFlex Air Cooled 753 AC Drive 20F11NC3P5JA0NNNNN three-phase 415V 1.5kW 3.5A IP20/IP00 protection, NEMA Open open cabinet, AC input with DC bus terminal Built-in DB IGBT, no HIM, 24V DC standard digital input + relay output, local embedded logic, modular forced air cooling, Frame1 rack, appearance dimensions: Width 130mm × Height 300mm × depth 172mm, weight: 3.2kg

Specification

Item	Specification
Brand	AB
Series	PowerFlex 753 Mid Performance AC Drive
Catalog Number	20F11NC3P5JA0NNNNN
Frame Size	Frame 1
Input Supply	3‑Phase 340–415V AC ±10%, 50/60Hz, 6‑Pulse Rectifier with Pre‑charge Circuit, DC Terminals Available
Continuous Normal Duty Output Current	3.5 A
ND 110% Overload (1 min)	3.85 A
Continuous Heavy Duty Output Current	2.1 A
HD 150% Overload (3 sec)	3.15 A
Normal Duty Motor Rating	1.5 kW
Heavy Duty Motor Rating	0.75 kW
Output Voltage	0 ~ 415 V 3‑Phase PWM
Output Frequency Range	0 ~ 500 Hz
Adjustable Carrier Frequency	2 kHz ~ 16 kHz
Control Modes	V/F Open Loop, Sensorless Vector (SVC), Closed‑Loop Vector (with encoder option card)
Supported Motors	Induction Motor, Permanent Magnet Synchronous Motor
Encoder Interface	No onboard port, optional encoder card required
I/O Signal Level	24V DC Digital Inputs & Relay Outputs, Dual‑channel STO Safe Torque Off (SIL3)
EMC Filter	Built‑in standard EMC filter, common mode choke jumper installed
Dynamic Brake IGBT	Integrated inside drive, external resistor required
Internal Brake Resistor	Not equipped
HIM Configuration	Blank cover, no factory HIM keypad
PCB Coating	Non‑conformal coated (standard)
Cooling System	Replaceable fan assemblies, fan life predictive diagnostic
Enclosure Rating	IP20 / IP00, NEMA Open Type
Operating Temperature	0 ~ 50 ℃ full load, derating required above 50 ℃
Altitude Derating	No derating ≤1000 m altitude
Onboard Communication	Dual Gigabit EtherNet/IP via option card, DLR ring support
Option Slots	3 slots for encoder, safety, extra I/O, network modules
Dimensions (W×H×D)	130 mm × 300 mm × 172 mm
Net Weight	3.2 kg
Shipping Weight	Approx. 4 kg
Product Status	Active standard production model

FAQ 

1.What is the voltage range of the three-phase input for 20F11NC3P5JA0NNNNN and what is the corresponding frequency in Hertz?

The

• Three-phase input voltage range: 340 – 415 VAC, with allowable voltage fluctuation of ±10%;
• Applicable grid frequency: 50Hz / 60Hz

2.20F11NC3P5JA0NNNNN – What is the power capacity of the motor that this is suitable for in normal load and heavy load conditions?

Supported. The

• Normal load ND: 1.5kW (3.5A)
• Heavy load condition HD: 0.75kW (2.1A)

3.What are the overall length, width, depth dimensions and net weight of the complete machine?

The

• Overall dimensions (width × height × depth): 130 mm × 300 mm × 172 mm
• Overall weight: 3.2 kg

4.What are the protection level and cabinet standard for 20F11NC3P5JA0NNNNN? What are the installation environment restrictions?

The

• Protection level: IP20 / IP00
• Cabinet specification: NEMA Open type open cabinet
• Can only be installed inside a sealed control cabinet,
• Avoid areas with intense vibration and far from strong electromagnetic interference sources
• Installation must be vertical and upright; it cannot be installed sideways or upside down;
• There should be ventilation space above and below the cabinet, multiple units can only be arranged side by side with zero gap, and must not be stacked closely above and below
• No reduction in capacity is allowed within an altitude of 1000m; above 1000m, the output current needs to be reduced;

Looking for Original  New 20F11NC3P5JA0NNNNN PowerFlex 753 AC Drive Three Phase 415V