20F11NC060JA0NNNNN PowerFlex 753 AC Drive Universal Type 30kW 40HP Three phase

Overview

The AB PowerFlex 753 20F11NC060JA0NNNNN AC Drive – Three-phase, 480V, 60A, 30kW, 40HP, 50/60Hz – Dynamic braking DB transistor – Pre-installed type II EMC filter – Air-cooled cooling – IP20, NEMA UL – Open cabinet, installed only on the frame 4 rack, with zero stacking installed side by side inside the cabinet – Weight 14.2 kg

Specification

Item	Specification
Brand	AB
Series	PowerFlex 753 General Purpose AC Drive
Catalog Number	20F11NC060JA0NNNNN
Frame Size	Frame 4
Input Supply	3‑Phase 380–480V AC ±10%, 50/60Hz, 6‑Pulse Rectifier with Pre‑charge Circuit
Continuous Rated Output Current	60 A
Normal Duty 110% Overload (1 min)	66 A
Heavy Duty 150% Overload (3 sec)	90 A
Normal Duty Motor Rating	30 kW / 40 HP
Heavy Duty Motor Rating	22 kW / 30 HP
Output Voltage	0 ~ 480 V 3‑Phase PWM
Output Frequency Range	0 ~ 650 Hz
Adjustable Carrier Frequency	2 kHz ~ 16 kHz
Control Modes	V/F Open Loop, Sensorless Vector (SVC), Closed‑Loop Vector (with encoder option card)
Supported Motors	Induction Motor, Permanent Magnet Synchronous Motor
Encoder Interface	No onboard port, optional encoder card required
I/O Signal Level	24V DC Digital Inputs & Relay Outputs, STO Safe Torque Off hardware circuit
EMC Filter	Factory pre‑installed standard EMC filter with common mode choke jumper
Dynamic Brake IGBT	Integrated inside drive
Internal Brake Resistor	Not equipped, external resistor required
HIM Configuration	Blank cover, no factory HIM keypad
PCB Coating	Non‑conformal coated
Cooling System	Forced air cooling, replaceable fan assembly, fan life predictive diagnostic
Enclosure Rating	IP20 / IP00, NEMA Open Type
Operating Temperature	0 ~ 50 °C full load without derating; derating required above 50 °C
Altitude Derating	No derating ≤1000 m altitude
Onboard Communication	No built‑in Ethernet; optional EtherNet/IP, DeviceNet, Profibus add‑on cards
Built‑in Functions	DeviceLogix embedded logic, PID, multi‑speed, S‑curve ramp, DC braking, fault log, parameter copy
Protections	Overcurrent, Overvoltage, Undervoltage, Module Overtemp, Motor Overload, Ground Fault, Phase Loss, Output Short Circuit, Stall Protection, STO Fault
Installation	Side‑by‑side zero stack cabinet mounting
Overall Dimensions (W×H×D)	267 mm × 537 mm × 266 mm
Net Weight	14.2 kg
Shipping Weight	Approx. 15.8 kg
Product Status	Active / In production

FAQ 

1.What are the overall length, width, depth and net weight of model 20F11NC060JA0NNNNN?

The

• Dimensions: Height: 537 mm × Width: 267 mm × Depth: 266 mm
• Weight: 14.2 kg

2.What is the maximum motor power suitable for the 20F11NC060JA0NNNNN type ordinary load?

Supported. The

• Normal load (ND) compatible motor power: 30kW (40HP).
• Heavy load (HD) compatible power: 22kW (30HP)

3.What is the range of the three-phase input voltage for 20F11NC060JA0NNNNN?

The 380 – 480 VAC, with an allowable voltage fluctuation of ±10%, compatible with 50/60Hz three-phase industrial power grid

4.What are the protection level and cabinet standard of the 20F11NC060JA0NNNNN inverter?

The

• Protection level: IP20 / IP00
• Cabinet standard: NEMA/UL Open Type (open cabinet)
• It can only be installed inside the control cabinet and cannot be used outdoors, in rain, or in dusty open areas directly.

Looking for Original  New 20F11NC060JA0NNNNN PowerFlex 753 AC Drive Universal Type 30kW 40HP Three phase