IMS20B-08M75B30C-2-M4-J IMS20B Series Servo Motor

Overview

The INVT IMS20B series servo motor, 750W, 3000 RPM, 2.39 N·m, AC 220V, 3.2A, 17bit multi-turn absolute magnetic encoder, multi-turn memory built-in, communication protocol is Inventron dedicated serial, with flat key shaft, 80 machine base flange, B-level insulation, natural air cooling, three different connectors, flange B3/B5 installation; can be installed horizontally or vertically, IP67, this product weighs 2.8 kg

Specification

Item	Specification
Catalog No.	IMS20B‑08M75B30C‑2‑M4‑J
Series	IMS20B AC Permanent‑Magnet Servo Motor
Rated Power	0.75 kW
Rated Speed	3000 r/min; Max 4000 r/min
Rated Torque	2.39 N·m; Peak Torque 7.17 N·m
Rated Voltage	AC 220V
Encoder	17‑bit Multi‑turn absolute magnetic encoder
Brake	Without holding brake
Shaft	With flat key, shaft diameter 19 mm
Flange size	80 mm square flange
Dimension(W×H×L)	80 mm × 80 mm ×131 mm
Weight	2.8 kg
Protection Class	IP67(connector properly locked)
Operating Temp	‑20℃~+40℃

FAQ 

1.What are the rated speed and the maximum allowable speed of the IMS20B-08M75B30C-2-M4-J motor in revolutions per minute?

The

• Rated rotational speed: 3000 rpm
  Maximum allowable rotational speed: 4000 rpm

2.What is the diameter of the output shaft of IMS20B-08M75B30C-2-M4-J? Is it equipped with a flat key? What is the specification of the key slot?

Supported. The

• Output shaft diameter: 19 mm
• Whether with flat key: Comes with flat key at factory
• Keyway specification: 6 mm × 6 mm × 25 mm

3.The motor body of IMS20B-08M75B30C-2-M4-J has an IP67 protection rating. Under what conditions will the protection rating become invalid?

The

• The power plug, encoder aviation plug were not fully tightened in place, the sealing ring was missing or damaged, and the protection was completely ineffective;
• The oil seal ring at the motor output shaft was aged, scratched, or fell off, allowing water and dust to enter from the shaft extension position;
• The surface screws of the motor housing were not tightened, and the sealing gasket at the shell joint was missing or damaged;
• The cable housing was damaged, and water vapor penetrated into the plug cavity through the interior of the cable.
• Note: IP67 only represents the motor body, and does not include the accompanying cables.

4.What are the radial and axial loads (in Newtons) that the output shaft of IMS20B-08M75B30C-2-M4-J can withstand?

The

• Allowable radial load: 480 N
• Allowable axial load: 190 N

Looking for Original  New IMS20B – 08M75B30C – 2 – M4 – J IMS20B Series Servo Motor