VFD2800C43A-00 C2000 Series Drive 480VAC 280kW 375HP 560A IP20

Overview

The Delta VFD2800C43A-00 C2000 Series Drive – Three-phase 480VAC 6-pulse diode rectification, DC reactor, 6 digital DI channels, 3 relay DO channels, 3 analog AI channels, 2 analog AO channels, PID closed-loop regulator, RS485 port, Modbus RTU interface, 10K step programmable PLC, supports 16-segment multi-segment speed switching, IP20, only allows installation inside the cabinet, overall size (width 700mm × height 1435mm × depth 398mm), bare machine net weight: 162 kg

Specification

Item	Specification
Brand	Delta Electronics
Series	VFD-C2000 Plus High Performance Vector Drive
Frame Size	Frame H1
Model No.	VFD2800C43A-00
Input Power	3‑Phase 323~528VAC (-15%~+10%), 47~63Hz, 6‑pulse Rectifier, Built-in DC Reactor, Pre-charge Circuit
Normal Duty Output Current	560 A, 120% overload for 60s
Heavy Duty Output Current	523 A, 150% overload for 60s, 180% overload for 3s
ND Matched Motor Power	280 kW / 375 HP
HD Matched Motor Power	250 kW / 335 HP
Max Output Voltage	0~480 V 3‑Phase PWM
Max Output Frequency	0.00~599 Hz
Adjustable Carrier Frequency	2 ~ 9 kHz (Default: 4 kHz)
Control Modes	V/F, Sensorless SVC, PG FOC; Supports IPM & SPM PMSM
Low-speed Torque (Sensorless)	150% rated torque at 0.5Hz
Zero-speed Torque (PG Closed-loop)	150% rated torque at 0Hz
I/O Control Power	24 V DC
Standard Analog Terminals	3 AI, 2 AO
Standard Digital Terminals	6 DI, 3 Relay DO
Built-in PLC	10K steps program capacity, multi-speed & PID function supported
Built-in Communication	RS485 Modbus RTU
Optional Fieldbus Cards	EtherCAT, Modbus TCP, EtherNet/IP, Profibus-DP, PROFINET, CANopen, PG encoder cards, I/O extension cards
Built-in Brake Chopper	No (External brake unit & resistor required)
Built-in EMC Filter	No
Cooling Fan	Separately replaceable modular fans with runtime & fault warning, service life ~25000 hours
Enclosure Rating	IP20 (Cabinet mounting only, not for outdoor use)
Operating Ambient Temp	0 ~ 40 ℃ (full load); Derate above 40 ℃
Storage Temperature	-10 ℃ ~ 70 ℃
Altitude Derating Rule	Full load ≤1000m; Reduce 1% output current per 100m above 1000m
PCB Coating (Model -00)	No conformal coating; Humid/corrosive environment choose suffix -21
Installation Clearance	Min 50mm side gap, min 100mm top space, min 50mm bottom space; No zero stacking allowed
Dimension (W×H×D)	700 × 1435 × 398 mm
Net Weight	162 kg (Tolerance ±7kg)
Shipping Weight	Approx. 170 kg
Protection Functions	Overcurrent, Overvoltage, Undervoltage, Short circuit, Ground fault, Input phase loss, Motor overload, IGBT overtemperature, Fan abnormal warning, Stall prevention, Early overload alarm

FAQ 

1.What are the overall length, width and depth dimensions as well as the net weight of the VFD2800C43A-00 unit?

The

• Overall machine dimensions: (width 700 × height 1435 × depth 398, units: mm)
• Overall machine weight: 228 kg

2.Is the VFD2800C43A-00 model equipped with a built-in programmable PLC?

Supported. The Built-in programmable PLC with 10K-step program capacity. The ladder logic can be written using WPLSoft.

3.Which motor control modes does VFD2800C43A-00 support?

The

• Three motor control modes:
• V/F open-loop control
• SVC sensorless vector control
• FOC encoder closed-loop field-oriented vector control

4.What are the motor power ratings for light-load and heavy-load applications under standard grid conditions for VFD2800C43A-00?

The

• ND Light Load (Fan and Pump Variable Torque Load): 280kW / 375HP
• HD Heavy Load (Lifting, Rolling Mills, Extrusion, etc. Constant Torque Load): 250kW / 335HP

Looking for Original  New VFD2800C43A-00 C2000 Series Drive 480VAC 280kW 375HP 560A IP20