VFD1600C43A-00 C2000 Series Drive Three Phase 480VAC 160kW 310A 215HP

Overview

The Delta C2000 Series Drive VFD1320C43A-00 Three-phase 480VAC 132kW 175HP 260A PID process control 6 digital DI channels, 3 relay DO channels, 3 analog AI channels/2 analog AO channels; control circuit power supply 24VDC with RS485 port 10K step capacity programmable PLC, supports multi-speed, frequency modulation resonance suppression. Three fan modular forced air cooling, fans can be disconnected and removed for replacement. IP00/IP20 open cabinet, only allowed to be installed inside a sealed control cabinet. Overall size:(Wide 420mm × Height 800mm × Depth 300mm) Weight: 86.4kg

Specification

Item	Specification
Brand	Delta Electronics
Series	VFD-C2000 Plus High Performance Vector Drive
Model No.	VFD1600C43A-00
Frame Size	Frame F1
Input Power	3‑Phase 323~528VAC (-15%~+10%), 47~63Hz, 6‑pulse Rectifier, built-in DC reactor, pre-charge circuit
Normal Duty Output Current	310 A (120% overload 60s)
Heavy Duty Output Current	295 A (150% overload 60s, 180% overload 3s)
ND Rated Motor Power	160 kW / 215 HP
HD Rated Motor Power	132 kW / 175 HP
Output Voltage	0~480 V 3‑Phase PWM
Max Output Frequency	0~599 Hz
Adjustable Carrier Frequency	2 ~ 10 kHz (default 6 kHz)
Control Modes	V/F, Sensorless SVC, FOC with PG, IPM/SPM PMSM drive
Low Speed Torque	150% @ 0.5Hz (sensorless); 150% @ 0Hz (closed-loop PG)
I/O Control Power	24 V DC
Built-in DC Reactor	Yes
Built-in Brake Chopper	No, external brake unit required
Built-in EMC Filter	Not equipped
Onboard Communication	RS485 Modbus RTU; optional EtherCAT/EtherNet/IP/Profibus-DP
Built-in PLC	10K steps, multi-speed, PID, skip frequency function
Cooling Fan	Triple replaceable fans, fan runtime warning function
Enclosure Rating	IP20, cabinet installation only
Full Load Ambient Temp	0 ~ 40 ℃, derating above 40 ℃
Altitude Derating	No derating ≤1000 m; -1% current per 100 m above 1000 m
PCB Conformal Coating	Standard model without coating
Mounting Rule	Side clearance ≥50mm mandatory; vertical top/bottom ventilation clearance mandatory
Dimension (W×H×D)	420 mm × 800 mm × 300 mm
Net Weight	86.5 kg
Shipping Weight	Approx. 91 kg
Product Status	Active mass production model

FAQ 

1.VFD1600C43A-00 ND What is the rated output current for normal load and the duration of overload at 120%? (in amperes)?

The

• ND’s rated output current for normal load: 310A
• Duration of 120% overload: 60 seconds

2.What are the heavy-load rated output current, the duration of overload at 150% and the short-term overload multiple of 3 seconds for VFD1600C43A-00 HD?

Supported. The

• Rated output current for heavy load: 295A
• Duration of 150% overload: 60 seconds
• Multiplication factor for 3-second short-term overload: 180%

3.Does the VFD1600C43A-00 drive have a built-in programmable PLC and support multi-speed switching and PID process regulation?

The

• Built-in programmable PLC: Equipped with a 10K-step program capacity built-in PLC, allowing for the writing of ladder diagram logic, simple positioning, and other functions.
• Supports multi-speed switching: Up to 16 speed segments, which can be quickly switched through digital DI terminals, or can be combined with the built-in PLC to write complex multi-speed timing and segmented acceleration/deceleration logic.
• Supports PID process regulation: Integrates an independent PID regulator with sleep-saving energy-saving function.
• The functions of the three can be independently enabled or can be used in combination and overlapped.

4.What are the overall length, width and depth dimensions of the VFD1600C43A-00 unit, as well as the net weight of the bare machine?

The

• Overall machine dimensions: (width 420 mm × height 800 mm × depth 300 mm)
• Net weight of the bare machine: 86.5 kg

 

Looking for Original  New VFD1600C43A-00 C2000 Series Drive Three Phase 480VAC 160kW 310A 215HP