SH30701P11F2000 With Brake Maximum Speed 8000 rpm

Overview

The The Schneider SH Series SH30701P11F2000 single-phase 115/230V, three-phase 400/480V, with four speed settings, maximum 8000rpm. Equipped with flat keys, IP65 (body), IP54 (shaft end), with brake. Maximum current of 5.7A. Smooth shaft. No brake. Precise positioning. Excellent performance and high efficiency.

Specification

Parameter Category	Parameter Item	Technical Specification
General Information	Model Number	SH30701P11F2000
	Product Family	Schneider Electric SH3 Series
	Product Type	High-Speed Permanent Magnet Synchronous Servo Motor
	Standard Flange Size	70 mm (IM B5 mounting)
	Encoder Configuration	Single-turn absolute SinCos Hiperface encoder, 128 pulses/revolution
	Built-in Holding Brake	Yes, rated holding torque 2 N·m
	Net Weight	Approximately 2.1 kg
Electrical Specifications	Comprehensive Rated Power	690 W
	Rated Power by Voltage	220 W (115V AC 1-phase); 440 W (230V AC 1-phase); 820 W (400V AC 3-phase); 950 W (480V AC 3-phase)
	Rated Supply Voltage	115/230V AC (1-phase); 400/480V AC (3-phase)
	Full-Range Rated Torque	1.25 N·m
	Rated Torque by Voltage	1.4 N·m (115V/230V 1-phase); 1.1 N·m (400V/480V 3-phase)
	Peak Torque	3.5 N·m
	Continuous Stall Torque	1.25 N·m
	Rated Stall Current	1.8 A
	Maximum Peak Current	5.7 A (Irms)
	Rated Speed by Voltage	1500 rpm (115V AC 1-phase); 3000 rpm (230V AC 1-phase); 6000 rpm (400V AC 3-phase); 7200 rpm (480V AC 3-phase)
	Maximum Allowable Speed	8000 rpm
	Torque Constant	0.31 N·m/A
	Rotor Inertia	0.32 kg·cm²
	Insulation Class	Class F (155 °C)
Mechanical Specifications	Output Shaft Diameter	11 mm
	Output Shaft Length	23 mm
	Shaft Configuration	With standard flat keyway
	Protection Rating	IP65 (motor main body); IP54 (shaft end seal)
Interface & Compatibility	Encoder Interface	Native Hiperface SinCos interface
	Compatible Servo Drives	Schneider ELAU PacDrive 3 / VCA07 series servo drives
	Supported Fieldbus Protocols (via paired drive)	SERCOS III, EtherCAT, CANopen, Profibus DP, TCP/IP
Environmental Specifications	Operating Ambient Temperature	0 °C to 45 °C (non-condensing)
	Storage Temperature	-20 °C to +70 °C
	Industrial Certifications	CE, UL, cUL

FAQ

1.What are the corresponding rated rotational speeds for SH30701P11F2000 under different voltages?

The

• 115V single phase: 1500 rpm
• 230V single phase: 3000 rpm
• 400V three phase: 6000 rpm
• 480V three phase: 7200 rpm
• Maximum 8000 rpm

2.What are the rated torques corresponding to each voltage level for SH30701P11F2000?

Supported. The

• 115V/230V single-phase: 1.4Nm
• 400V/480V three-phase: 1.1Nm

3.What are the diameter and length of the output shaft of the SH30701P11F2000 motor?

The

• Axle diameter: 11mm
• Axle length: 23mm

4.What are the corresponding rated powers for different voltage settings of SH30701P11F2000?

The

• 115V single phase: 220W
• 230V single phase: 440W
• 400V three phase: 820W
• 480V three phase: 950W

Looking for Original  New SH30701P11F2000 With Brake Maximum Speed 8000 rpm