S7-1200 6ES7214-1HH50-0XB0 PLC, DC 20.4 – 28.8 V IP20 Pulse Output PTO

Overview

The SIMATIC 6ES7214-1HH50-0XB0 PLC, DC 20.4 – 28.8 V (rated 24 V DC), reverse polarity protection DI: 14 channels × 24 V DC, source type / drain type, up to 100 kHz high-speed counting 1×RJ45, built-in 2-port switcher; supports PROFINET (controller / device), TCP/IP, Modbus TCP, OPC UA, DHCP, SNMP. Can expand 8 signal modules (SM) + 3 communication modules (CM)

Specification

FAQ

1.How is the configuration of the built-in Ethernet interface for 6ES7214-1HH50-0XB0?

The

• Physical interface: 1 × RJ45, integrated with 2-port switch (can be cascaded to the next level device)
• Rate: 10/100 Mbps, auto-negotiation / auto-crossover (Auto-MDIX)
• IPv4, supports static / DHCP, can be set in TIA Portal or panel
• Supports media redundancy, priority start, PROFIenergy, etc. time mode

2.Does the 6ES7214-1HH50-0XB0 model have analog input and output functions with an integrated body?

Supported. The It only comes with digital I/O, without onboard AI/AO analog interfaces. If analog inputs/outputs are needed, an external expansion module must be connected.

3.How many high-speed counters does 6ES7214-1HH50-0XB0 have?

The There are a total of 8 channels, and the maximum frequency for each channel can reach up to 100 kHz.

4.Which communication protocols does 6ES7214-1HH50-0XB0 support?

The The

• PROFINET IO (Controller/Device, supporting RT/IRT, PROFIenergy, media redundancy)
• TCP/IP, ISO-on-TCP (RFC 1006), UDP (Open IE communication)
• S7 communication (Server/Client, interoperable with S7-200/300/400/1200/1500)
• Modbus TCP (Master/Slave)
• OPC UA (Server, firmware V4.4+)
• Web server (built-in, supports web diagnosis/monitoring)
• DHCP, SNMP, DCP, LLDP
• Non-Ethernet (requires expansion module)
• Modbus RTU, USS (via RS-485/232 communication module)
• PROFIBUS DP (via PROFIBUS module)

Looking for Original  New S7-1200 6ES7214-1HH50-0XB0 PLC, DC 20.4 – 28.8 V IP20 Pulse Output PTO