Overview
The 25A-D017N114 is a PowerFlex 523 series 480V compact three-phase AC frequency inverter, rated at 7.5kW/10HP, with 17A output. It features built-in STO safety and USB configuration, but no built-in EtherNet/IP communication (expansion card required).
Specification
| Item | Specification |
|---|---|
| Part Number | 25A-D017N114 |
| Product Series | PowerFlex 523 |
| Input Voltage | 3-phase 380–480V AC, 50/60 Hz |
| Continuous Output Current | 17 A RMS |
| Power Rating | 7.5 kW / 10 HP |
| Control Mode | V/Hz, Sensorless Vector (SVC), Closed Loop Vector (CLV), Permanent Magnet Motor Control |
| Safety Function | STO (Safe Torque Off) |
| Safety Rating | PL d / SIL 2 / Category 3 |
| Braking | Built-in braking IGBT |
| EMC | Built-in EMC filter |
| Enclosure | IP20 (NEMA Open) |
| Frame Size | Frame C |
| Weight | Approx. 2.18 kg |
| Operating Temperature | -20°C to +70°C |
FAQ:
1.Which communication protocols does the 25A-D017N114 support?
Standard configuration: Modbus RTU, DSI
Optional expansion: EtherNet/IP, DeviceNet, PROFIBUS DP, PROFINET
2.Does 25A-D017N114 support speed regulation or frequency conversion control?
25A-D017N114 is a variable frequency speed control inverter that supports variable frequency speed control.
3.What are the common faults and troubleshooting methods for 25A-D017N114?
Overcurrent (OC): Check for motor/line short circuits and load jamming; reduce starting frequency.
Overvoltage (OV): Check input voltage; extend deceleration time; install a braking unit if necessary.
Undervoltage (UV): Check input voltage, contactor, and power supply fluctuations.
Overheat (OH): Clean the air duct heat sink; check the cooling fan; reduce load.
Motor Phase Loss: Check output wiring, cables, and motor windings.
Communication Failure: Check RS485/EIP wiring, address settings, and terminating resistors.
Overload (OL): Reduce load; verify motor parameters; extend acceleration and deceleration time.
Ground Failure (GF): Check cable insulation, motor grounding, and wiring damage.
External Failure: Check emergency stop, DI terminal, and external interlock signals.
Parameter Abnormality: Restore factory settings and reconfigure operating parameters.
Looking for Original New 25A-D017N114 PowerFlex 523 AC Drive 7.5kW 380 480V Inverter
We supply this 25A-D017N114 mainly to system integrators and maintenance teams for replacement and retrofit projects.
Contact US to get a good prices now !
Reviews
There are no reviews yet.