Overview

6SN2132 – 1CR11 – 1BA1 is a programmable positioning brushless motor of the Siemens SIMODRIVE POSMO A series. It is powered by 24V and has a rated power of 75W. It is equipped with a planetary gearbox with a transmission ratio of i=20.25, which can adapt to precise transmission requirements. It has a protection level of IP54, which can effectively prevent dust and low-pressure water spray, and is suitable for conventional harsh industrial environments such as dust. It supports Profibus DP for communication. Standard slave protocol can stably access the corresponding industrial communication network.

FAQ:

1.What is the rated current and power consumption of 6SN2132-1CR11-1BA1 when running in a 24V power supply environment?

The rated power consumption of 6SN2132 – 1CR11 – 1BA1 is clearly 75W. There are no public precise parameters for its rated current in a 24V power supply environment, but it can be deduced through theoretical calculations and the characteristics of the same series:

1. Rated power consumption: This model belongs to the Siemens SIMODRIVE POSMO A series programmable positioning brushless motor. The officially marked rated power is 75W. This value is also equivalent to its core power consumption when operating under rated working conditions, adapting to the low-power precise positioning requirements in a 24V power supply scenario.
2. Rated current: The official rated current parameters of this model have not been found through public channels. Estimated from the basic electrical formula “Current (I) = Power (P) ÷ Voltage (U)”, at 24V rated voltage, its theoretical rated current is approximately 3.125A (75W÷24V). However, this is only a calculated value under ideal conditions, and the actual operating current will deviate slightly due to factors such as motor load fluctuations and gearbox transmission losses.

2.6SN2132-1CR11-1BA1 is a discontinued spare part. What parameters of the device need to be confirmed when replacing it to ensure suitability ?