Product Introduce
2080-LC30-24QWB is a Micro830 series 24-point programmable logic controller. It integrates 14 channels of 24V DC/AC digital input and 10 channels of relay output. It is equipped with RS232/485 and USB programming ports. It supports Modbus and expansion modules. It shares 8 points of high-speed input and needs to allocate channels according to pulse counting/high-speed capture and other requirements.
Parameter
| Parameter | Value |
|---|---|
| Product Series | Micro830 (Bulletin 2080‑LC30) |
| Power Supply | 24V DC |
| Digital Inputs | 14 points (6 standard + 8 high-speed shared, 24V DC/AC) |
| Digital Outputs | 10 points (relay, normally open) |
| Memory | 4 kB program, 10 kB data (SD card expansion supported) |
| Communication | USB 2.0 programming port; RS232/485 combo port (Modbus RTU) |
| Expansion | Up to 3 plug-in slots |
| Operating Temperature | -20～60°C |
| Dimensions | Approx. 90×145×80 mm (panel mounting) |
FAQ:
1.What is the maximum pulse frequency supported by the 8 high-speed shared inputs of 2080-LC30-24QWB? Does it support the multiplexing of high-speed counter and pulse capture function?
8 high-speed shared inputs with single-phase up to 100 kHz and quadrature mode up to 50 kHz; support high-speed counter and pulse capture function multiplexing, but only one function can be enabled on the same channel at the same time.
2.What is the maximum load current and voltage range of a single channel of the 10-channel relay output of 2080-LC30-24QWB? Can it directly drive a 220V AC contactor or a 24V DC solenoid valve?
| Parameter | Specification |
|---|---|
| Voltage Range | 24–240 V AC, 24–28 V DC |
| Max Continuous Current (per point) | 2 A @ 30 °C; 0.3 A @ 65 °C |
| Max Common Current | 5 A |
| Drive Capability | Yes for 220 V AC contactors (≤2 A) and 24 V DC solenoids (≤2 A) |
3.What is the programming software version that 2080-LC30-24QWB is compatible with, and can it be backward compatible with earlier programs of the Micro800 series?
The 2080‑LC30‑24QWB adaptation programming software is Connected Components Workbench (CCW). The minimum recommended is V10.0 and above (more stable with firmware V10+). It is compatible with early Micro800 programs generated by V8.x/V9.x, and can be backward compatible and automatically migrated.
Looking for Original New Micro830 24 2080-LC30-24QWB Logic PLC Controller?
Contact US to get a good prices now !
Reviews
There are no reviews yet.