Milltronics MFA 4p Motion failure alarm controller: set-point alarm controller, for use with MSP
motion probes. Enclosure: NEMA 4X, Polycarbonate enclosure Input voltage: 100/115/200/230
VAC, 50/60 Hz, switch selectable. Speed detection version: standard, underspeed (U/S) or overspeed (O/S),
switch selectable Approvals: Ordinary Locations/General Purpose (Non-Ex), CE, UKCA, RCM, KC, CCSAUS, FM
7MH7144-….Motion Failure Alarm MFA-4P
7MH7145-..REMOTE MOUNTED AMPLIFIER (RMA)
7MH7146-…MOTION SENSING PROBES
7MH7145-..REMOTE MOUNTED AMPLIFIER (RMA)
7MH7146-…MOTION SENSING PROBES
Milltronics MFA 4p is a highly sensitive, single setpoint motion sensor alarm unit, used with
MSP and XPP probes. The probe detects an increase or decrease in the speed of rotating,
reciprocating, or conveying equipment and sends the information to the MFA 4p. The MFA
4p works with a pre-amplifier which can be internal to the motion sensing probe or remote
from the motion sensing probe.
MSP and XPP probes. The probe detects an increase or decrease in the speed of rotating,
reciprocating, or conveying equipment and sends the information to the MFA 4p. The MFA
4p works with a pre-amplifier which can be internal to the motion sensing probe or remote
from the motion sensing probe.
Reviews
There are no reviews yet.